Configuring RMON show rmon event
11-24 Network Monitoring Configuration
show rmon event
UsethiscommandtodisplayRMONevententryproperties.
Syntax
show rmon event [index]
Parameters
Defaults
Ifindexisnotspecified,informationaboutallRMONentrieswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayRMONevententry3:
Matrix(rw)->show rmon event 3
Index 3
----------------
Owner = Manager
Status = valid
Description = STP Topology change
Type = log-and-trap
Community = public
Last Time Sent = 0 days 0 hours 0 minutes 37 seconds
Table 11‐5providesanexplanationofthecommandoutput.
index (Optional)DisplaysRMONpropertiesandlogentriesforaspecific
entryindexID.
Table 11-5 show rmon event Output Details
Output... What it displays...
Index Index number for this event entry.
Owner Text string identifying who configured this entry.
Status Whether this event entry is enabled (valid) or disabled.
Description Text string description of this event.
Type Whether the event notification will be a log entry, and SNMP trap, both,
or none.
Community SNMP community name if message type is set to trap.
Last Time Sent When an event notification matching this entry was sent.