Enterasys Matrix DFE-Gold Series

clear maclock static Configuring MAC Locking
Enterasys Matrix DFE-Gold Series Configuration Guide 24-9
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtorestrictMAClockingto4staticaddressesonfe.2.3:
Matrix(rw)->set maclock static fe.2.3 4
clear maclock static
UsethiscommandtoresetthenumberofstaticMACaddressesallowedperporttothedefault
valueof20.
Syntax
clear maclock static port_string
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoresetstaticMAClockingonfe.2.3:
Matrix(rw)->clear maclock static fe.2.3
set maclock trap
UsethiscommandtoenableordisableMAClocktrapmessaging.
Syntax
set maclock trap port_string {enable | disable}
Parameters
port_string SpecifiestheportonwhichtoresetthestaticMAClockinglimit.Fora
detaileddescriptionofpossibleport_stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.
port_string SpecifiestheportonwhichMAClocktrapmessagingwillbeenabled
ordisabled.Foradetaileddescriptionofpossibleport_stringvalues,
referto“PortStringSyntaxUsedintheCLI”onpage 4‐2.
enable|disable EnablesordisablesMAClocktrapmessaging.