Enterasys Matrix DFE-Gold Series

show console parity Setting Console Port Properties
Enterasys Matrix DFE-Gold Series Configuration Guide 4-11
Defaults
Ifport‐stringisnotspecified,stopbitspercharacterwillbeclearedforallconsoleports.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearstopbitspercharacterforconsoleportcom.1.1:
Matrix(rw)->clear console stopbits com.1.1
show console parity
Usethiscommandtodisplaythetypeofparitycheckingsetforoneormoreconsoleports.
Syntax
show console parity [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,paritytypeforallconsoleportswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplayparitytypeforconsoleportcom.1.1:
Matrix(rw)->show console parity com.1.1
Port Parity
------------ --------
com.1.1 none
set console parity
Usethiscommandtosettheparitytypeforoneormoreconsoleports.
Syntax
set console parity {none | odd | even | mark | space} [port-string]
Parameters
port‐string (Optional)Displaysparitytypeforspecificconsoleport(s).
none Specifiesthatnoparitycheckingwillbeperformed.
odd Enablesoddparitychecking.