Enterasys Matrix DFE-Gold Series

set smon vlan Configuring SMON
Enterasys Matrix DFE-Gold Series Configuration Guide 11-11
Status = enabled
--------------------
VLAN 1 Packets Octets
Total 8011072 2070785503
Overflow 0 0
NonUnicast 0 0
NonUnicast Overflow 0 0
set smon vlan
Usethiscommandtocreate,start,orstopSNMPVLAN‐relatedstatisticscounting.
Syntax
set smon vlan {create | enable | disable} port-string [owner]
Parameters
Defaults
Ifownerisnotspecified,nonewillbeapplied.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowsetthedevicetogatherSMONVLAN‐relatedstatisticsfrom1‐Gigabit
Ethernetport14inmodule3:
Matrix(rw)->set smon vlan ge.3.14
clear smon vlan
UsethiscommandtodeleteanSMONVLANstatisticscountingconfiguration.
Syntax
clear smon vlan [port-string]
create|enable|
disable
Creates,enables,ordisablesSMONVLANstatisticscounting.Create
automaticallyenables(starts)counters.
port‐string Specifiesoneormoresourceportsonwhichtocollectstatistics.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐
2.
owner (Optional)Specifiesanadministrativelyassignednameoftheownerof
thisentity.