Managing the Management Authentication Notification MIB clear mgmt-auth-notify
2-28 Startup and General Configuration
Thisexampleshowshowtosetonlytheconsoleandtelnetauthenticationaccesstypestobe
enabledontheManagementAuthenticationNotificationMIB.Thatinformationisthendisplayed
withtheshowcommand.:
Matrix(su)->set mgmt-auth-notify enable console telnet
Matrix(su)->show mgmt-auth-notify
Management Type Status
--------------- --------
console enabled
ssh disabled
telnet enabled
web disabled
clear mgmt-auth-notify
UsethiscommandtosetthecurrentsettingfortheManagementAuthenticationNotification
accesstypestothedefaultsettingofenabled.
Syntax
clear mgmt-auth-notify
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
EnsurethatSNMPiscorrectlyconfiguredontheDFEinordertosendthesenotifications.Referto
Chapter5forSNMPconfigurationinformation.
Example
ThisexampledisplaysthestateofManagementAuthenticationNotificationaccesstypespriorto
usingtheclearcommand,thendisplaysthesameinformationafterusingtheclearcommand:
Matrix(su)->show mgmt-auth-notify
Management Type Status
--------------- --------
console enabled
ssh disabled
telnet enabled
web disabled