ip dvmrp metric Configuring DVMRP
Enterasys Matrix DFE-Gold Series Configuration Guide 21-53
The“no”formofthiscommanddisablesDVMRP.
Example
ThisexampleshowshowtoenableDVMRPonVLAN1:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip dvmrp
ip dvmrp metric
UsethiscommandtoconfigurethemetricassociatedwithasetofdestinationsforDVMRP
reports.
Syntax
ip dvmrp metric metric
Parameters
Defaults
None.
Mode
Routercommand,Interfaceconfiguration:Matrix>Router(config‐if(Vlan1))#
Usage
ToresettheDVMRPmetricbacktothedefaultvalueof1,enteripdvmrpmetric0.
Example
ThisexampleshowshowtosetaDVMRPof16onVLAN1:
Matrix>Router(config-if(Vlan 1))#ip dvmrp metric 16
show ip dvmrp route
UsethiscommandtodisplayDVMRProutinginformation.
Syntax
show ip dvmrp route
Parameters
None.
Defaults
None.
metric SpecifiesametricassociatedwithasetofdestinationsforDVMRP
reports.Validvaluesarefrom0to31.Enteringa0valuewillresetthe
metricbacktothedefaultvalueof1.