Enterasys Matrix DFE-Gold Series

set macauthentication quietperiod Configuring MAC Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 25-37
set macauthentication quietperiod
Usethiscommandtoenableareauthenticationattemptforfailedentriesattheperiodspecifiedin
seconds.
Syntax
set macauthentication quietperiod time port-string
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
Defaultvalueis0(never).
Example
Thisexampleshowshowtosetthemacauthenticationquietperiodto120seconds
(2minutes)onge.2.1through5:
Matrix(rw)->set macauthentication quiet period 120 ge.2.1-5
clear macauthentication quietperiod
Usethiscommandtoclearthemacauthenticationquietperiodononeormoreportstothedefault
value.
Syntax
clear macauthentication quietperiod [port-string]
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
time Specifiesthenumberofsecondsbetweenreauthenticationattempts.
Validvaluesare0‐4294967295.
port‐string Specifiestheport(s)onwhichtosetthemacauthenticationquietperiod.
Foradetaileddescriptionofpossibleport‐stringvalues,referto“Port
StringSyntaxUsedintheCLI”onpage 4
‐2.
port‐string (Optional)Clearsthemacauthenticationquietperiodonspecificport(s).
Foradetaileddescriptionofpossibleport‐stringvalues,referto“Port
StringSyntaxUsedintheCLI”onpage 4‐2.