Enterasys Matrix DFE-Gold Series User Manual

Enterasys Matrix DFE-Gold Series Configuration Guide 17-1
17
PIM Configuration
ThischapterdescribestheProtocolIndependentMulticast(PIM)configurationsetofcommands
andhowtousethem.
Configuring PIM
Purpose
ToreviewandconfigureProtocolIndependentMulticast(PIM).
Commands
Router: Unless otherwise noted, the commands covered in this chapter can be executed only
when the device is in router mode. For details on how to enable router configuration modes, refer to
“Enabling Router Configuration Modes” on page 2-103.
Important Notice
PIM is an advanced routing feature that must be enabled with a license key. If you have purchased
an advanced license key, and have enabled routing on the device, you must activate your license
as described back in
“Activating Licensed Features” on page 2-58 in order to enable the PIM command
set. If you wish to purchase an advanced routing license, contact Enterasys Networks Sales.
For information about... Refer to page...
ip pim sparse mode 17-2
ip pim bsr-candidate 17-2
ip pim dr-priority 17-3
ip pim rp-address 17-4
ip pim rp-candidate 17-5
show ip pim bsr 17-5
show ip pim interface 17-6
show ip pim neighbor 17-7
show ip pim rp 17-8
show ip pim rp-hash 17-10
show ip mroute 17-10

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English