Enterasys Matrix DFE-Gold Series

Configuring Policy Class of Service (CoS) show cos settings
8-38 Policy Classification Configuration
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoclearallClassofServicetransmitqueuereferenceentries:
Matrix(rw)->clear cos reference txq all
show cos settings
UsethiscommandtodisplayClassofServiceparameters.
Syntax
show cos settings [cos-list]
Parameters
Defaults
Ifnotspecified,allCoSentrieswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtoshowallCoSsettings:
Matrix(rw)->show cos settings
* Means attribute has not been configured
CoS Index Priority ToS TxQ IRL
--------- ---------- ------- ----- -----
0 0 * 0 *
1 1 * 2 *
2 2 * 4 *
3 3 * 6 *
4 4 * 8 *
5 5 * 10 *
all|group‐type‐index Clearsallnon‐defaulttransmitqueuereferenceentriesoraspecific
entry.
reference Specifiesareferencenumberoftheentrytobecleared.
cos‐list (Optional)SpecifiesaClassofServiceentrytodisplay.