Enterasys Matrix DFE-Gold Series User Manual

show dot1x auth-config Configuring 802.1X Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 25-5
Matrix(rw)->show dot1x auth-stats fe.1.1
Port: 1 Auth-Stats:
EAPOL Frames Rx: 0
EAPOL Frames Tx: 0
EAPOL Start Frames Rx: 0
EAPOL Logoff Frames Rx: 0
EAPOL RespId Frames Rx: 0
EAPOL Resp Frames Rx: 0
EAPOL ReqId Frames Tx: 0
EAPOL Req Frames Tx: 0
Invalid EAPOL Frames Rx: 0
EAP Length Error Frames Rx: 0
Last EAPOL Frame Version: 0
Last EAPOL Frame Source: 0:0:0:0:0:0
show dot1x auth-config
Usethiscommandtodisplay802.1Xauthenticationconfigurationsettingsforoneormoreports.
Syntax
show dot1x auth-config [authcontrolled-portcontrol] [keytxenabled] [maxreq]
[quietperiod] [reauthenabled] [reauthperiod] [servertimeout] [supptimeout]
[txperiod] [port-string]
Parameters
authcontrolled‐
portcontrol
(Optional)DisplaysthecurrentvalueofthecontrolledPortcontrol
parameterforthePort.
keytxenabled (Optional)Displaysthestateof802.1Xkeytransmissioncurrentlyin
usebytheauthenticatorPAEstatemachine.
maxreq (Optional)Displaysthevaluesetformaximumrequestscurrentlyin
usebythebackendauthenticationstatemachine.
quietperiod (Optional)
Displaysthevaluesetforquietperiodcurrentlyinusebythe
authenticatorPAEstatemachine.
reauthenabled (Optional)Displaysthestateofreauthentica tioncontrolusedbythe
ReauthenticationTimerstatemachine.
reauthperiod (Optional)Displaysthevalue,inseconds,setforthereauthentication
periodusedbythereauthenticationtimerstatemachine.
servertimeout (Optional)Displaysthe
servertimeoutvalue,inseconds,currentlyin
usebythebackendauthenticationstatemachine.
supptimeout (Optional)Displaystheauthenticationsupplicanttimeoutvalue,in
seconds,currentlyinusebythebackendauthenticationstatemachine.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English