Enterasys Matrix DFE-Gold Series User Manual

set forcelinkdown Disabling / Enabling and Naming Ports
Enterasys Matrix DFE-Gold Series Configuration Guide 4-23
set forcelinkdown
Usethiscommandtoenableordisabletheforcelinkdownfunction.Whenenabled,thisforces
portsinthe“operstatusdown”statetobecomedisabled.
Syntax
set forcelinkdown {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoenabletheforcelinkdownfunction:
Matrix(rw)->set forcelinkdown enable
clear forcelinkdown
Usethiscommandtoresetstheforcelinkdownfunctiontothedefaultstateofdisabled.
Syntax
clear forcelinkdown
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoresettheforcelinkdownfunctiontodisabled:
Matrix(rw)->clear forcelinkdown
enable|disable Enablesordisablestheforcelinkdownfunctiononallports.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English