Enterasys Matrix DFE-Gold Series

Monitoring Network Events and Status show history
11-2 Network Monitoring Configuration
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Usage
Thecommandhistorybufferincludesalltheswitchcommandsentereduptoamaximumof50,as
specifiedinthesethistorycommand(“sethistory”onpage 11‐3).
Example
Thisexampleshowshowtodisplaythecontentsofthecommandhistorybuffer.Itshowsthereare
fivecommandsinthebuffer:
Matrix(rw)->history
1 hist
2 show gvrp
3 show vlan
4 show igmp
5 show ip address
show history
Usethiscommandtodisplaythesize(inlines)ofthehistorybuffer.
Syntax
show history
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaythesizeofthehistorybuffer:
Matrix(rw)->show history
History buffer size: 20