Enterasys Matrix DFE-Gold Series

show policy rule Assigning Classification Rules to Policy Profiles
Enterasys Matrix DFE-Gold Series Configuration Guide 8-7
Assigning Classification Rules to Policy Profiles
Purpose
Toreview,assignandunassignclassificationandadminrules.Classificationrulesmappolicy
profilestoprotocol‐basedframefilteringpoliciesconfiguredforaparticularVLANorClassof
Service(CoS).Adminrulesassignpolicyprofilestoincomingtraffic.
Commands
show policy rule
Usethiscommandtodisplaypolicyclassificationandadminruleinformation.
Syntax
show policy rule [attribute] | [all] | [admin-profile] | [profile-index] [ether
| ipdest | ipfrag | ipproto | ipsource | iptos | llcDsapSsap | macdest | macsource
| port | tcpdestport| tcpsourceport| udpdestport | udpsourceport [data] [mask
mask] [port-string port-string] [rule-status {active | not-in-service | not-
ready}] [storage-type {non-volatile | volatile}] [vlan vlan] | [drop | forward]
[dynamic-pid dynamic-pid] [cos cos] [admin-pid admin-pid] [-verbose]
Parameters
For information about... Refer to page...
show policy rule 8-7
show policy capability 8-10
set policy classify 8-11
set policy rule 8-13
clear policy rule 8-15
clear policy all-rules 8-16
set policy port 8-17
show policy allowed-type 8-17
set policy allowed-type 8-18
clear policy allowed-type 8-19
clear policy port-hit 8-19
attribute Displaystheattributesofthespecifiedrules.
all|admin‐profile|
profile‐index
Displaysalladminandclassificationrules,rulesfortheadminprofile,
orforaspecific
profile-indexnumber.Validindexvaluesare1‐1023 .
ether DisplaysEthernettypeIIrules.
ipdest DisplaysIPdestinationaddressrules.
ipfrag DisplaysIPfragmentationrules.
ipproto DisplaysIPprotocolfieldinIPpacketrules.