Configuring NetFlow set netflow cache
15-4 NetFlow Configuration
Export Interval: 30 (min)
Number of Entries: 196607
Inactive Timer: 40 (sec)
Template Refresh-rate: 20 (packets)
Template Timeout: 30 (min)
Enabled Ports:
-----------------
ge.1.11,23
set netflow cache
Usethiscommandtoenable(create)ordisable(freeup)aNetFlowcacheoneachDFEbladeinthe
EnterasysMatrixsystem.
Syntax
set netflow cache {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
ANetFlowcachemaintainsNetFlowinformationforallactiveflows.Bydefault,NetFlowcaches
arenotcreated.
Example
Thisexampleshowshowtoenable,orcreate,aNetFlowcacheoneachDFEbladeinthesystem:
Matrix(rw)->set netflow cache enable
clear netflow cache
Usethiscommandtoremove,orfreeup,theNetFlowcachesoneachDFEbladeintheEnterasys
Matrixsystem.
Syntax
clear netflow cache
Parameters
None.
enable|disable EnableordisabletheNetFlow cache.