To Next Page

To Previous Page

Configuring IGMP show igmp config

9-8 IGMP Configuration

Mode

Switchcommand,Read‐Write.

Example

ThisexampleshowshowtofloodmulticastframestotheVLANwhenthemulticastgrouptableis

full:

Matrix(rw)->set igmp grp-full-action 2

show igmp config

UsethiscommandtodisplayIGMPconfigurationinformationforoneormoreVLANs.

Syntax

show igmp config vlan-list

Parameters

Defaults

None.

Mode

Switchcommand,Read‐Only.

Example

ThisexampleshowshowtodisplayIGMPconfigurationinformationforVLAN1:

Matrix(rw)->show igmp config 1

IGMP config for vlan 1

VlanQueryInterval - 125

VlanStatus - Active

Vlan IGMP Version - 2

VlanQuerier - 134.141.22.1

VlanQueryMaxResponseTime - 10

VlanRobustness - 2

VlanLastMemberQueryIntvl - 10

VlanQuerierUpTime - 24039

Table 9‐1showsadetailedexplanationofcommandoutput.Fordetailsonusingthesetigmp

configcommandtosettheseparameters,referto“setigmpconfig”onpage 9‐9.

vlan‐list SpecifiestheVLAN(s)forwhichtodisplayIGMPconfiguration

information.

Table 9-1 show igmp config Output Details

Output... What it displays...

VlanQueryInterval Frequency (in seconds) of host-query frame transmissions.

VlanStatus Whether or not VLAN configuration is Active or Not in Service.

Enterasys Matrix DFE-Gold Series User Manual

Questions and Answers: