Enterasys Matrix DFE-Gold Series

clear cos all-entries Configuring Policy Class of Service (CoS)
Enterasys Matrix DFE-Gold Series Configuration Guide 8-41
Parameters
Defaults
Ifnooptionsarespecified,allinformationforalltypesofCoSviolationswillbedisplayed.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoclearbothstatusandcountersfromallCoSinboundratelimiting
violationentries:
Matrix(rw)->clear cos violation irl all both
clear cos all-entries
UsethiscommandtoclearsallClassofServiceentriesexceptprioritysettings0‐7.
Syntax
clear cos all-entries
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoclearallClassofServiceentriesexceptprioritysettings0‐7:
Matrix(rw)->clear cos all-entries
all Clearsallinboundratelimitingviolationentries.
disabled‐ports Clearsthelistofportsthataredisabledbecauseofviolatinganinbound
ratelimiter.
violation-index
Clearstheentryforaspecificviolationindex.
both
| status | counter Clearstheviolationstatus,theviolationcounter,orboth.