Enterasys Matrix DFE-Gold Series - Clear Maclock Firstarrival; Set Maclock Static

Configuring MAC Locking clear maclock firstarrival
24-8 Security Configuration
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtomoveallcurrentfirstarrivalMACstostaticentriesonfe.1.3:
Matrix(rw)->set maclock move fe.1.3
clear maclock firstarrival
UsethiscommandtoresetthenumberoffirstarrivalMACaddressesallowedperporttothe
defaultvalueof600.
Syntax
clear maclock firstarrival port-string
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoresetMACfirstarrivalsonfe.2.3:
Matrix(rw)->clear maclock firstarrival fe.2.3 6
set maclock static
UsethiscommandtorestrictMAClockingonaporttoamaximumnumberofstatic(management
defined)MACaddressesforendstationsconnectedtothat port.
Syntax
set maclock static port_string value
Parameters
port_string Specifiestheportonwhichtoresetthefirstarrivalvalue.Foradetailed
descriptionofpossiblep o rt_stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
port_string SpecifiestheportonwhichtolimitMAClocking.Foradetailed
descriptionofpossiblep o rt_stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
value SpecifiesthenumberofstaticMACaddressestobeallowed
connectionstotheport.Validvaluesare0to20
.