Enterasys Matrix DFE-Gold Series

set port negotiation Setting Auto-Negotiation and Advertised Ability
Enterasys Matrix DFE-Gold Series Configuration Guide 4-31
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplayauto‐negotiationstatusfor1‐GigabitEthernetport14in
module 3:
Matrix(rw)->show port negotiation ge.3.14
auto-negotiation is enabled on port ge.3.14.
set port negotiation
Usethiscommandtoenableordisableauto‐negotiationononeormoreports.
Syntax
set port negotiation port-string {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtodisableauto‐negotiationon1‐GigabitEthernetport3inmodule14:
Matrix(rw)->set port negotiation ge.3.14 disable
show port mdix
UsethiscommandtodisplaytheMDI/MDIXmodeononeormoreports.Thisfunctiondetects
andadaptstostraightthrough(MDI)orcross‐over(MDIX)Ethernetcablingonswitchports.
Syntax
show port mdix [port-string] {all | auto | mdi | mdix}
Parameters
port‐string Specifiestheport(s)forwhichtoenableordisableauto‐negotiation.For
adetaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.
enable|disable Enablesordisablesauto‐negotiation.
port‐string (Optional)Displaysmodeforspecificport(s).Foradetaileddescription
ofpossibleport‐stringvalues,referto“PortStringSyntaxUsedinthe
CLI”onpage 4‐2.
all Displaysport(s)MDIandMDIXadminstatus.