Enterasys Matrix DFE-Gold Series

clear spantree lp Configuring Spanning Tree Loop Protect Features
Enterasys Matrix DFE-Gold Series Configuration Guide 6-67
IfnoSIDisspecified,SID0isassumed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayLoopProtectstatusonfe.2.3:
Matrix(rw)->show spantree lp port fe.2.3
LoopProtect is enabled on port fe.2.3 , SID 0
clear spantree lp
UsethiscommandtoreturntheLoopProtectstatusperportandoptionally,perSID,toitsdefault
stateofdisabled.
Syntax
clear spantree lp port-string [sid sid]
Parameters
Defaults
IfnoSIDisspecified,SID0isassumed.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoreturntheLoopProtect stat eonfe.2.3todisabled:
Matrix(rw)->clear spantree lp port fe.2.3
show spantree lplock
UsethiscommandtodisplaytheLoopProtectlockstatusperportand/orperSID.
Syntax
show spantree lplock [port port-string] [sid sid]
port‐string Specifiesport(s)forwhichtocleartheLoopProtectfeaturestatus.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.
sidsid (Optional)SpecifiesthespecificSpanningTree(s)forwhichtoclearthe
LoopProtectfeaturestatus.
Validvaluesare0‐4094.Ifnotspecified,
SID0isassumed.