Enterasys Matrix DFE-Gold Series

show console baud Setting Console Port Properties
Enterasys Matrix DFE-Gold Series Configuration Guide 4-5
Parameters
Defaults
Ifport‐stringisnotspecified,propertiesforallconsoleportswillbecleared.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtoclearpropertiesforconsoleportcom.1.1:
Matrix(rw)->clear console com.1.1
show console baud
Usethiscommandtodisplaythebaudrateforoneormoreconsoleports.
Syntax
show console baud [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,baudrateforallconsoleportswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaythebaudrateforconsoleportcom.1.1:
Matrix(rw)->show console baud com.1.1
Port Baud
------------ --------
com.1.1 38400
set console baud
Usethiscommandtosetthebaudrateforoneormoreconsoleports.
Syntax
set console baud rate [port-string]
port‐string (Optional)Clearspropertiesforspecificconsoleport(s).
port‐string (Optional)Displaysbaudrateforspecificconsoleport(s).