Enterasys Matrix DFE-Gold Series - Set Port Alias; Show Forcelinkdown

Disabling / Enabling and Naming Ports set port alias
4-22 Port Configuration
set port alias
Usethiscommandtoassignanaliasnametoaport.
Syntax
set port alias port-string [string]
Parameters
Defaults
Ifstringisnotspecified,thealiasassignedtothe portwillbecleared.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoassignthealias“management”tofe.3.1:
Matrix(rw)->set port alias fe.3.1 management
show forcelinkdown
Usethiscommandtodisplaythestatusoftheforcelinkdownfunction.
Syntax
show forcelinkdown
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaythestatusoftheforcelinkdownfunction:
Matrix(rw)->show forcelinkdown
ForceLinkDown feature is globally enabled
port-string
Specifiestheporttowhichanaliaswillbeassigned.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
string (Optional)Assignsatextstringnametotheport.