Enterasys Matrix DFE-Gold Series User Manual

clear logging default Configuring System Logging
Enterasys Matrix DFE-Gold Series Configuration Guide 10-7
Example
ThisexampleshowshowtosettheSyslogdefaultfacilitynametolocal2andtheseveritylevelto4
(errorlogging):
Matrix(rw)->set logging default facility local2 severity 4
clear logging default
Usethiscommandtoresetloggingdefaultvalues.
Syntax
clear logging default{[facility] [severity] [port]}
Parameters
Defaults
•Atleastoneoptionalparametermustbeentered.
•Allthreeoptionalkeywordsmustbeenteredtoresetallloggingvaluestodefaults.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoresettheSyslogdefaultseveritylevelto6:
Matrix(rw)->clear logging default severity
show logging application
UsethiscommandtodisplaytheseveritylevelofSyslogmessagesforoneorallapplications
configuredforloggingonyoursystem.
Syntax
show logging application [mnemonic | all]
Parameters
Defaults
Ifnotspecified,informationforallapplicationswillbedisplayed.
facility (Optional)Resetsthedefaultfacilitynametolocal4.
severity (Optional)Resetsthedefaultloggingseveritylevelto6(notificationsof
significantconditions).
port (Optional)ResetsthedefaultUDPporttheclientusestosendtothe
serverto514.
mnemonic|all (Optional)Displaysseveritylevelforoneorallapplicationsconfigured
forlogging.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English