Enterasys Matrix DFE-Gold Series User Manual

show snmp user Configuring SNMP Users, Groups and Communities
Enterasys Matrix DFE-Gold Series Configuration Guide 5-11
•Ifuserisnotspecified,informationaboutallSNMPuserswillbedisplayed.
•Ifremoteisnotspecified,userinformationaboutthelocalSNMPenginewillbedisplayed.
•Ifnotspecified,userinformationforallstoragetypeswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Examples
ThisexampleshowshowtodisplayanSNMPuserlist:
Matrix(rw)->show snmp user list
--- SNMP user information ---
--- List of registered users:
Guest
admin1
admin2
netops
ThisexampleshowshowtodisplayinformationfortheSNMP“guest”user:
Matrix(rw)->show snmp user guest
--- SNMP user information ---
EngineId: 00:00:00:63:00:00:00:a1:00:00:00:00
Username = Guest
Auth protocol = usmNoAuthProtocol
Privacy protocol = usmNoPrivProtocol
Storage type = nonVolatile
Row status = active
Table 5‐5showsadetailedexplanationofthecommandoutput.
Table 5-5 show snmp user Output Details
Output... What it displays...
EngineId SNMP local engine identifier.
Username SNMPv1 or v2 community name or SNMPv3 user name.
Auth protocol Type of authentication protocol applied to this user.
Privacy protocol Whether a privacy protocol is applied when authentication protocol is
in use.
Storage type Whether entry is stored in volatile, nonvolatile, or read-only memory.
Row status Status of this entry: active, notInService, or notReady.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English