Enterasys Matrix DFE-Gold Series

show igmp grp-full-action Configuring IGMP
Enterasys Matrix DFE-Gold Series Configuration Guide 9-7
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtodisableIGMPqueryingonVLAN104:
Matrix(rw)->set igmp query-disable 104
show igmp grp-full-action
UsethiscommandtoshowwhatactiontotakewithmulticastframeswhenthemulticastIGMP
grouptableisfull
Syntax
show igmp grp-full-action
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaytheactiontakenformulticastframeswhentheIGMPgroup
tableisfull:
Matrix(rw)->show igmp grp-full-action
Group Table Full Action: Flood to Vlan
set igmp grp-full-action
Usethiscommandtodeterminewhatactiontotakewithmulticastframeswhenthemulticast
grouptableisfull.
Syntax
set igmp grp-full-action action
Parameters
Defaults
FloodmulticastframestotheVlan
action Specifiestheactiontotakewhenthe mu lticastGroupTableisfull.The
optionsare:
• 1-send multicast frames to Routers
• 2-flood multicast frames to the VLAN