Configuring Flow Setup Throttling (FST) show flowlimit class
24-30 Security Configuration
Defaults
•Ifnotspecified,allactiontypeswillberemoved.
•Ifnotspecified,theactionwillberemovedfromallportclassifications.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoremoveflowlimitingaction1fromallportclassifications:
Matrix(rw)->clear flowlimit action1
show flowlimit class
Usethiscommandtodisplayflowlimitingclassificationconfiguration(s).
Syntax
show flowlimit class [userport | serverport | aggregateduser | interswitchlink |
unspecified]
Parameters
Defaults
Ifportclassificationtypeisnotspecified,informationrelatedtoallclassificationswillbe
displayed.
Mode
Switchcommand,Read‐Only.
disable (Optional)Removesthedisableaction.
userport|serverport
|aggregateduser|
interswitchlink|
unspecified
(Optional)Removesthisactionconfigurationfromtheuser
classificationporttype:
•userport
•serverport
•aggregationport
•inter‐switchlink
•unspecifiedport
userport|serverport
|aggregateduser|
interswitchlink|
unspecified
(Optional)Displaysflowlimitinginformationrelatedtothefollowing
classification:
•userport
•serverport
•aggregationport
•interswitchlink
•unspecifiedport