Configuring SNMP Notification Parameters show snmp notify
5-34 SNMP Configuration
Parameters
Defaults
•Ifanotifynameisnotspecified,allentrieswillbedisplayed.
•Ifvolatile,nonvolatileorread‐onlyarenotspecified,allstoragetype entrieswillbe
displayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaytheSNMPnotifyinformation:
Matrix(rw)->show snmp notify
--- SNMP notifyTable information ---
Notify name = 1
Notify Tag = Console
Notify Type = trap
Storage type = nonVolatile
Row status = active
Notify name = 2
Notify Tag = TrapSink
Notify Type = trap
Storage type = nonVolatile
Row status = active
Table 5‐11showsadetailedexplanationofthecommandoutput.
notify (Optional)Displaysnotifyentriesforaspecificnotifyname.
volatile|nonvolatile
|read‐only
(Optional)Displaysnotifyentriesforaspecificstoragetype.
Table 5-11 show snmp notify Output Details
Output... What it displays...
Notify name A unique identifier used to index the SNMP notify table.
Notify Tag Name of the entry in the SNMP notify table.
Notify Type Type of notification: SNMPv1 or v2 trap or SNMPv3 InformRequest
message.
Storage type Whether access entry is stored in volatile, nonvolatile or read-only
memory.
Row status Status of this entry: active, notInService, or notReady.
To Next Page
Loading...
Need help?
General