EasyManua.ls Logo

Enterasys Matrix DFE-Gold Series

Enterasys Matrix DFE-Gold Series
944 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring Network Address Translation (NAT) ip nat inside source static (NAPT)
18-6 Network Address Translation (NAT) Configuration
ip nat inside source static (NAPT)
UsethiscommandtoenablestaticNAPTtranslationofinsidesourceaddresses.
Syntax
ip nat inside source static {tcp | udp} local-ip local-port global-ip global-port
no ip nat inside source static {tcp | udp} local-ip local-port global-ip
global-port
Parameters
Defaults
None.
Usage
PacketsforthespecifiedprotocolfromaddressesthatmatchtheIPaddressandportforthisstatic
entryaretranslated.
ThenoversionofthecommanddeletesthespecifiedstaticNAPTtranslation.
Mode
Routercommand,Globalconfiguration:Matrix>Router(config)#
Example
ThisexampleenablesastaticNAPTtranslationofinsidesourceaddressesforprivatelocal
address10.10.10.51onport123destinedforandtransmittingfromuniquepublicaddress
45.20.10.6onport121:
Matrix->Router(config)#ip nat inside source static tcp 10.10.10.51 123 45.20.10.6
121
ip nat ftp-control-port
UsethiscommandtospecifytheNATFTPcontrolport.
Syntax
ip nat ftp-control-port port-number
no ip nat ftp-control-port
Parameters
localip SpecifiestheprivateIPaddressforthisstaticNAPTtranslation.
localport SpecifiestheL4sourceportassociatedwiththeprivateIPaddressfor
thisstaticNAPTtranslation.
globalip Specif iestheuniquepublicIPaddressforthisstaticNAPTtranslation.
globalport SpecifiestheL4translatedsourceportportassociatedwith
theunique
publicIPaddressforthisstaticNAPTtranslation.
portnumber SpecifiestheFTPcontrolport.Defaultvalue:21.

Table of Contents

Related product manuals