set tacacs Configuring TACACS+
Enterasys Matrix DFE-Gold Series Configuration Guide 25-65
set tacacs
UsethiscommandtoenableordisabletheTA CACS+client.
Syntax
set tacacs {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
TheTACACS+clientcanbeenabledontheswitchanytime,withorwithoutaTACACS+server
online.IftheTACACS+serverisofflineandTACACS+isenabled,theloginauthenticationis
switchedtoRADIUSorlocal,ifenabled.
Examples
ThisexampleshowshowtoenabletheTACACS+client.
Matrix(rw)->set tacacs enable
show tacacs server
UsethiscommandtodisplaythecurrentTACACS+serverconfiguration.
Syntax
show tacacs server {index | all}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Only.
enable|disable EnablesordisablestheTACACSclient.
index
DisplaytheconfigurationoftheTACACS+serveridentifiedbyindex.
Thevalueof
indexcanrangefrom1to2,147,483,647.
all DisplaytheconfigurationforallconfiguredTACACS+servers.