Enterasys Matrix DFE-Gold Series - Set Tacacs Singleconnect

Configuring TACACS+ set tacacs singleconnect
25-72 Authentication Configuration
Defaults
Ifstateisnotspecified,allsingleconnectionconfigurationparametersaredisplayed(whichatthis
timeincludesonlytheenabled/disabledstate).
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtodisplaythestateofthe TACACS+client’s abilitytosendmultiple
requestsoverasingleconnection.
Matrix(rw)->show tacacs singleconnect
TACACS+ single-connect state: enabled
set tacacs singleconnect
UsethiscommandtoenableordisabletheabilityoftheTACACS+clienttosendmultiplerequests
overasingleTCPconnection.Whenenabled,theTACACS+clientwilluseasingleTCP
connectionforallrequeststoagivenTACACS+server.
Syntax
set tacacs singleconnect {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtodisablesendingmultiplerequestsoverasingleconnection.
Matrix(rw)->set tacacs singleconnect disable
enable|disable EnableordisabletheabilitytosendmultiplerequestsoverasingleTCP
connection.