Enterasys Matrix DFE-Gold Series

Configuring Spanning Tree Bridge Parameters clear spantree backuproottrapenable
6-44 Spanning Tree Configuration
Example
Thisexampleshowshowtoenablethebackuproottrapfunction:
Matrix(rw)->set spantree backuproottrapenable enable
clear spantree backuproottrapenable
UsethiscommandtoresetstheSpanningTreebackuproottrapfunctiontothedefaultstateof
disabled.
Syntax
clear spantree backuproottrapenable.
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoresetthebackuproottrapfunction:
Matrix(rw)->clear spantree backuproottrapenable
show spantree newroottrapendable
UsethiscommandtodisplaythestateoftheSpanningTreenewroottrapfunction.
Syntax
show spantree newroottrapenable
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaythestatusofthenewroottrapfunction:
Matrix(rw)->show spantree newroottrapenable
New Root Trap is set to enable