clear sntp poll-interval Configuring Simple Network Time Protocol (SNTP)
Enterasys Matrix DFE-Gold Series Configuration Guide 13-7
clear sntp poll-interval
UsethiscommandtoclearthepollintervalbetweenunicastSNTPrequests.
Syntax
clear sntp poll-interval
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtocleartheSNTPpollinterval:
Matrix(rw)->clear sntp poll-interval
set sntp poll-retry
UsethiscommandtosetthenumberofpollretriestoaunicastSNTPserver.
Syntax
set sntp poll-retry retry
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtosetthenumberofSNTPpollretriesto5:
Matrix(rw)->set sntp poll-retry 5
clear sntp poll-retry
UsethiscommandtoclearthenumberofpollretriestoaunicastSNTPserver.
Syntax
clear sntp poll-retry
retry Specif iesthenumberofretries.Validvaluesare0to10.