Enterasys Matrix DFE-Gold Series User Manual

show spantree mstcfgid Configuring Spanning Tree Bridge Parameters
Enterasys Matrix DFE-Gold Series Configuration Guide 6-17
Example
ThisexampleshowshowtodisplayassignmentsforallVLANsassignedtoanySIDotherthan
SID 0:
Matrix(rw)->show spantree vlanlist
Vlan 104 is mapped to Sid 104
Vlan 105 is mapped to Sid 105
Vlan 106 is mapped to Sid 106
Vlan 107 is mapped to Sid 107
show spantree mstcfgid
UsethiscommandtodisplaytheMSTconfigurationidentifierelements,includingformatselector,
configurationname,revisionlevel,andconfigurationdigest.
Syntax
show spantree mstcfgid
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaytheMSTconfigurationidentifierelements.Inthiscase,the
defaultrevisionlevelof0,andthedefaultconfigurationname(astringrepresentingthebridge
MACaddress)havenotbeenchanged.Forinformationonusingthesetspantreemstcfgid
commandtochangethesesettings,referto
“setspantreemstcfgid”onpage 6‐17:
Matrix(rw)->show spantree mstcfgid
MST Configuration Identifier:
Format Selector: 0
Configuration Name: 00:01:f4:89:51:94
Revision Level: 0
Configuration Digest: ac:36:17:7f:50:28:3c:d4:b8:38:21:d8:ab:26:de:62
set spantree mstcfgid
UsethiscommandtosettheMSTconfigurationnameand/orrevisionlevel.
Syntax
set spantree mstcfgid {cfgname name | rev level}

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English