inservice (real server) Configuring Load Sharing Network Address Translation (LSNAT)
Enterasys Matrix DFE-Gold Series Configuration Guide 19-13
inservice (real server)
UsethiscommandtoenablearealLSNATserver.
Syntax
inservice
no inservice
Parameters
None.
Defaults
None.
Mode
Routercommand,SLBRealServerConfigurationmode:Matrix>Router(config‐slb‐real)#
Usage
The“no”formofthiscommandremovestherealserverfromservice.
Example
ThisexampleshowshowtoenabletherealserverIP10.1.2.3inthe“httpserver” serverfarm:
Matrix>Router(config)#ip slb serverfarm httpserver
Matrix>Router(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router(config-slb-real)#inservice
faildetect (real server)
Usethiscommandtoconfigurewhichmethod(type)isusedtodetectwhetheranLSNATserveris
upordown.
Syntax
faildetect {type {both | ping | app [upd] | acv [udp]}} | ping-int seconds ping-
retries number | app-int seconds app-retries number
no faildetect