Enterasys Matrix DFE-Gold Series

clear multiauth mode Configuring Multiple Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 27-3
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoenablemultipleauthentication:
Matrix(rw)->set multiauth mode multi
clear multiauth mode
Usethiscommandtoclearthesystemauthenticationmode.
Syntax
clear multiauth mode
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearthesystemauthenticationmode:
Matrix(rw)->clear multiauth mode
show multiauth
Usethiscommandtodisplaysystem‐configuredmultiauthvalues.
Syntax
show multiauth
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.