Configuring Policy Class of Service (CoS) show cos unit
8-26 Policy Classification Configuration
show cos unit
UsethiscommandtodisplayClassofServiceunitsofmeasureinformation,includingratetype,
minimumandmaximumlimitsoftheportgroups,andtheirrespectivegranularity.
Syntax
show cos unit [irl | txq] [port-type index]
Parameters
Defaults
Ifnotspecified,allratelimitinginformationforallporttypesandCoSunitsofmeasurewillbe
displayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtoshowallClassofServiceIRLunitofmeasureinformation:
Matrix(rw)->show cos unit irl
Port Type Type Unit Maximum Rate Minimum Rate Granularity
--------- ---- ---- ------------ ------------ -----------
0 irl Gbps 10 1 1
0 irl Mbps 10000 1 1
0 irl Kbps 10000000 5121024 1
0 irl perc 100 1 1
1 irl Gbps 10 1 1
1 irl Mbps 10000 1 1
1 irl Kbps 10000000 5121024 1
1 irl perc 100 1 1
Supported rate types Unit of measure supported by the port type.
Eligible ports Which device ports meet this port type criteria.
Unselected ports Which ports have not been assigned user-defined port configuration
settings,
Table 8-5 show cos port-type Output Details
Output... What it displays...
irl|txq (Optional)Displaysinboundratelimitingortransmitqueue
information.
port‐typeindex (Optional)Displaysinformationforaspecificporttype.
Displaystheunitofmeasureaspercentageoftotalbandwidth,or
kilobits,megabits,orgigabitspersecond.