Enterasys Matrix DFE-Gold Series User Manual

Configuring RMON show rmon topN
11-30 Network Monitoring Configuration
Example
ThisexampleshowshowtodisplayallRMONTopNpropertiesandstatistics.Acontrolentry
displaysfirst,followedbyactualentriescorrespondingtothecontrolentry:
Matrix(rw)->show rmon topN
--------------------
Index = 1
Status = 1 valid
Owner = monitor
Start Time = 0
HostIndex = 1
Rate Base = 1 InPkts
Duration = 10
Time Remaining = 0
Requested Size = 10000
Granted Size = 100
Report 1
-------------------
Rate = 3
Address = 0.1.f4.6.2e.40
Table 11‐6providesanexplanationofthecommandoutput.Propertiesaresetusingthesetrmon
topNpropertiescommandasdescribedin“setrmontopNproperties”onpage 11‐31.
Table 11-6 show rmon topN Output Details
Output... What it displays...
Index Index number for this event entry. Each entry defines one top N report
prepared for one interface.
Status Whether this event entry is enabled (valid) or disabled.
Owner Text string identifying who configured this entry.
Start Time System up time when this report was last started.
HostIndex Index number of the host table for which this top N report will be
prepared.
Rate Base Type of counter (and corresponding integer value) activated with this
entry: as InPackets (1), OutPackets (2), InOctets (3), OutOctets (4),
OutErrors (5), Broadcast packets (6), or Multicast packets (7).
Duration Collection time (in seconds) for this report.
Time Remaining Collection time left for this report if still in progress.
Requested Size Maximum number of hosts requested for the top N table.
Granted Size Actual maximum number of hosts in the top N table. Depending on
system resources, this may differ from the Requested Size value.
Rate Amount of change in the counter type (InPackets, OutPackets, etc.)
during the sampling interval.
Address MAC address of the host.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English