Enterasys Matrix DFE-Gold Series

Configuring Power over Ethernet (PoE) show port inlinepower
2-70 Startup and General Configuration
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoresetPoEtrapmessagingformodule1todisabled:
Matrix(rw)->clear inlinepower psetrap 1
show port inlinepower
UsethiscommandtodisplayallportssupportingPoE.
Syntax
show port inlinepower [port-string]
Parameters
Defaults
Ifnotspecified,informationforallPoEportswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayPoEinformationforFastEthernetports11,12and13in
module1:
Matrix(rw)->show port inlinepower fe.1.1-2
Oper Admin Power Power PD
Port Type Status Status Priority Class Limit Usage Type
(truncated) (mW) (mW)
------- ------------- ---------------- ------ -------- ----- ----- ----- ------
fe.1.11 Wireless 1 delivering power auto critical 0 16800 7500 legacy
fe.1.12 Wireless 2 delivering power auto high 1 16800 7500 802.3af
fe.1.13 Wireless 3 searching auto low 3 16800 7500 other
set port inlinepower
UsethiscommandtoconfigurePoEparametersononeormoreports.
Syntax
set port inlinepower port-string {[admin {off | auto}] [priority {critical | high
| low}] [type type] [powerlimit powerlimit]}
port‐string (Optional)DisplaysinformationforspecificPoEport(s).