Enterasys Matrix DFE-Gold Series

show rmon host Configuring RMON
Enterasys Matrix DFE-Gold Series Configuration Guide 11-27
show rmon host
UsethiscommandtodisplayRMONpropertiesandstatisticsassociatedwitheachhost
discoveredonthenetwork.
Syntax
show rmon host [port-string] [address | creation]
Parameters
Defaults
•Ifport‐stringisnotspecified,informationaboutallportswillbedisplayed.
•Ifaddressorcreationarenotspecified,entrieswillnotbesorted.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayRMONhostpropertiesandstatistics.Acontrolentrydisplays
first,followedbyactualentriescorrespondingtothecontrolentry.Foradescriptionofthetypesof
statisticsshown,refertoTable 11‐3:
Matrix(rw)->show rmon host
------------------
Host Index 1
Interface 21009
Table size 100
Last deletion 766048
Status 1
Owner monitor
Host 00-00-5e-00-01-01 Creation Order 22
In Pkts 0
Out Pkts 1
In Octets 0
Out Octets 66
Broadcast Pkts 0
Multicast Pkts 0
Host 00-00-f6-00-86-6d Creation Order 74
In Pkts 0
Out Pkts 2
In Octets 0
port‐string (Optional)DisplaysRMONpropertiesandstatisticsforspecificport(s).
address|creation (Optional)SortsthedisplaybyMACaddressorcreationtimeofthe
entry.