set logging here Configuring System Logging
Enterasys Matrix DFE-Gold Series Configuration Guide 10-13
set logging here
UsethiscommandtoenableordisablethecurrentCLIsessionasaSyslogdestination.
Syntax
set logging here {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
TheeffectofthiscommandwillbetemporaryifthecurrentCLIsessionisusingTelnetorSSH,but
persistentontheconsole.
Example
ThiscommandshowshowtoenablethedisplayofloggingmessagestothecurrentCLIsession:
Matrix(rw)->set logging here enable
clear logging here
UsethiscommandtocleartheloggingstateforthecurrentCLIsession.
Syntax
clear logging here
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThiscommandshowshowtocleartheloggingstateforthecurrentCLIsession:
Matrix(rw)->clear logging here
enable|disable EnablesordisablesdisplayofloggingmessagesforthecurrentCLI
session.