Enterasys Matrix DFE-Gold Series

Configuring Convergence End Points (CEP) Phone Detection show cep connections
25-40 Authentication Configuration
show cep connections
UsethiscommandtodisplayalllearnedCEPs.
Syntax
show cep connections port-string
Parameters
Defaults
None
Mode
Read‐Only.
Example
ThisexampleshowshowtodisplayCEPconnectionsforportfe.1.21:
Matrix>show cep connections fe.1.21
Connection Info for fe.1.21
Endpoint Type h323
Policy Index 3
Discovery Time MON FEB 06 02:31:42 2006
Firmware Version
Address Type unknown
Endpoint IP unavailable
Endpoint MAC 00:04:0d:01:f8:35
show cep detection
UsethiscommandtodisplayCEPphonedetectionparameters.
Syntax
show cep detection [detection-id]
set cep detection-id type 25-45
set cep detection-id address 25-46
set cep detection-id protocol 25-46
set cep detection-id porthigh | portlow 25-47
set cep initialize 25-48
clear cep 25-49
For information about... Refer to page...
port‐string DisplaysCEPstatusforoneormoreports.Foradetaileddescriptionof
possibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”
onpage 4‐2.