Enterasys Matrix DFE-Gold Series

set linkflap globalstate Configuring Link Traps and Link Flap Detection
Enterasys Matrix DFE-Gold Series Configuration Guide 4-43
set linkflap globalstate
Usethiscommandtogloballyenableordisablethelinkflapdetectionfunction.Bydefault,the
functionisdisabledgloballyandonallports.Ifdisabledgloballyafterper‐portsettingshavebeen
configuredusingthecommandslaterinthi schapter,per‐portsettingswillberetained.
Syntax
set linkflap globalstate {disable | enable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtogloballyenablethelinktrapdetectionfunction:
Matrix(rw)->set linkflap globalstate enable
set linkflap
Usethiscommandtoenableordisablelinkflapmonitoringononeormoreports.
Syntax
set linkflap portstate {disable | enable} [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,allportswillbedisabledorenabled.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoenablethelinktrapmonitoringonallports:
Matrix(rw)->set linkflap portstate enable
disable|enable Globallydisablesorenablesthelinkflapdetectionfunction.
disable|enable Disablesorenablesthelinkflapdetectionfunction.
port‐string (Optional)Specifiestheport(s)onwhichtodisableorenable
monitoring.Foradetaileddescriptionofpossibleport‐stringvalues,
referto“PortStringSyntaxUsedintheCLI”onpage 4‐2.