Enterasys Matrix DFE-Gold Series

Enterasys Matrix DFE-Gold Series Configuration Guide 10-1
10
System Logging Configuration
Thischapterdescribessystemloggingcommandsandhowtousethem.
Configuring System Logging
Purpose
Todisplayandconfiguresystem logging,includingSyslogserversettings,loggingseveritylevels
forvariousapplicat ions,Syslog defaultsettings,andtheloggingbuffer.
Commands
Note: An Enterasys Feature Guide document that contains a complete discussion on Syslog
configuration exists at the following Enterasys web site: http://www.enterasys.com/support/
manuals/
For information about... Refer to page...
show logging all 10-2
show logging server 10-3
set logging server 10-4
clear logging server 10-5
show logging default 10-5
set logging default 10-6
clear logging default 10-7
show logging application 10-7
set logging application 10-9
clear logging application 10-11
show logging local 10-11
set logging local 10-12
clear logging local 10-12
set logging here 10-13
clear logging here 10-13
show logging buffer 10-14