Enterasys Matrix DFE-Gold Series User Manual

show system utilization Setting Basic Device Properties
Enterasys Matrix DFE-Gold Series Configuration Guide 2-37
Lookup DDR: 8 MB 8 MB 8 MB
Transmit DDR: 8 MB 8 MB 8 MB
Receive DDR: 8 MB 8 MB 8 MB
Routing DDR: 8 MB 8 MB 8 MB
MAC CHIP 0 1 2
Model: FastEnet FastEnet FTM1
Revision: 1 1 0
PHY CHIP 0
Model: BCM5226
Revision: 2
show system utilization
Usethiscommandtodisplaysystemresourceutilization information.
Syntax
show system utilization [cpu | process | storage] [slot slot]
Parameters
Defaults
•Ifnotspecified,CPU,process,andstoragesystemutilizationinformationwillbedisplayed.
•Ifnotspecified,informationforallmoduleswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplayallsystemutilizationinformationforthemoduleinslot1:
Matrix(rw)->show system utilization slot 1
CPU Utilization Threshold Traps enabled: Threshold = 80.0%
Total CPU Utilization:
Slot CPU 5 sec 1 min 5 min
---------------------------------------------------
1 1 3.6% 3.0% 3.0%
Process Utilization:
Slot: 1 CPU: 1
cpu|process|
storage
(Optional)DisplaystotalCPU,individualprocess,orstorageresource
utilizationonly.
slotslot (Optional)Displayssystemresourceutilizationforaspecificmodule.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English