Setting Basic Device Properties show system hardware
2-36 Startup and General Configuration
Example
Theî ±followingî ±exampleî ±showsî ±aî ±portionî ±ofî ±theî ±informationî ±displayedî ±withî ±theî ±showî ±systemî ±
hardwareî ±command.
Matrix(rw)->show system hardware
CHASSIS HARDWARE INFORMATION
----------------------------
Chassis Type: Matrix N7 Platform
Chassis Serial Number: 0001a300611b
Power Supply 1: Not Installed
Power Supply 2: Installed & Operating, AC, Not Redundant
Chassis Fan: Installed & Operating
SLOT HARDWARE INFORMATION
-------------------------
SLOT 1
Model: 7H4382-494H4282-492G4072-52
Serial Number: 0123456789AB
Part Number: 6543210
Vendor ID: 1
Base MAC Address: 11-22-33-44-55-66
Router MAC Address: 11-22-33-44-55-67
Hardware Version: 5
Firmware Version: 02.00.13
BootCode Version: 01.00.07
CPU Version: 8 (PPC 740/750)
UpLink: Not Present
SDRAM: 128 MB
NVRAM: 8 KB
Flash System: 32 MB
/flash0 free space: 11 MB
/flash1 free space: 14 MB
Dip Switch Bank 1 2 3 4 5 6 7 8
Position: OFF OFF OFF OFF OFF OFF OFF OFF
HOST CHIP
Revision: 1.0
FABRIC CHIP 0 1
Revision: 1.0 1.0
SWITCH CHIP 0 1 2
Block ID: 0 1 3
Revision: 1.50/150 1.50/150 1.50/150
Note: Depending on the hardware configuration of your Matrix system, your output will vary from
the example shown.
To Next Page
Loading...
Need help?
General