Configuring OSPF show ip ospf
21-42 Routing Protocol Configuration
Example
Thisî ±exampleî ±showsî ±howî ±toî ±disableî ±strictî ±LSAî ±checkingî ±onî ±thisî ±router:
Matrix->Router(config)#router ospf 1
Matrix->Router(config-router)#graceful-restart strict-lsa-checking-disable
show ip ospf
Useî ±thisî ±commandî ±toî ±displayî ±OSPFî ±information.
Syntax
show ip ospf
Parameters
None.
Defaults
None.
Mode
Routerî ±command,î ±Anyî ±routerî ±mode.
Example
Thisî ±exampleî ±showsî ±howî ±toî ±displayî ±OSPFî ±information:
Matrix>Router#show ip ospf
Routing Process "ospf 20 " with ID 134.141.7.2
Supports only single TOS(TOS0) route
It is an area border and autonomous system boundary router
Summary Link update interval is 0 seconds.
External Link update interval is 0 seconds.
Redistributing External Routes from,
Number of areas in this router is 3
Area BACKBONE (0)
Number of interfaces in this area is 0
Area has no authentication
SPF algorithm executed 65 times
Area ranges are
Link State Update Interval is 00:30:00 and due in 00:03:12.
Link State Age Interval is 00:00:00 and due in 00:00:00.
Area 0.0.0.3
Number of interfaces in this area is 1
Area has no authentication
SPF algorithm executed 59 times
Area ranges are
To Next Page
Loading...
Need help?
General