Reviewing Port Status show port counters
4-16 Port Configuration
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets 0
In Unicast Pkts 0
In Multicast Pkts 0
In Broadcast Pkts 0
In Discards 0
In Errors 0
In Unknown Protocol 0
Out Octets 0
Out Unicasts Pkts 0
Out Multicast Pkts 0
Out Broadcast Pkts 0
Out Errors 0
Out Queue Length 256
802.1Q Switch Counters
----------------------
Frames Received 0
Frames Transmitted 0
Frames Filtered 0
Thisexampleshowshowtodisplayallfe.3.1portcounterstatisticsrelatedtotrafficthroughthe
device.
Matrix(rw)->show port counters fe.3.1 switch
Port: fe.3.1 Bridge Port: 2
No counter discontinuity time
802.1Q Switch Counters
-------------------------------------------
Frames Received 0
Frames Transmitted 0
Frames Filtered 0
Table 4‐2providesanexplana tion ofthecommandoutput.
Table 4-2 show port counters Output Details
Output... What it displays...
Port Port designation. For a detailed description of possible port-string
values, refer to “Port String Syntax Used in the CLI” on page 4-2.
MIB2 Interface MIB2 interface designation.
Bridge Port IEEE 802.1D bridge port designation.
To Next Page
Loading...
Need help?
General