Enterasys Matrix DFE-Gold Series

set netflow export-destination Configuring NetFlow
Enterasys Matrix DFE-Gold Series Configuration Guide 15-5
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
Whenthiscommandisexecuted,NetFlowiseffectivelydisabledonthesystem.
Example
ThisexampleshowshowtoremovetheNetFlowcachesontheDFEbladesanddisableNetFlow:
Matrix(rw)->clear netflow cache
set netflow export-destination
UsethiscommandtoconfiguretheNetFlowcollectordestination.
Syntax
set netflow export-destination ip-address [udp-port]
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
Bydefault,nocollectoraddressisconfigured.OnlyonecollectordestinationperEnterasysMatrix
systemcanbeconfigured.
Example
ThisexampleshowshowtosettheIPaddressoftheNetFlowcollector:
Matrix(rw)->set netflow export-destination 10.10.1.1
clear netflow export-destination
UsethiscommandtocleartheNetFlowcollectorIPaddress.
Syntax
clear netflow export-destination [ip-address [udp-port]]
ip‐address SpecifiestheIPaddressoftheNetFlowcollector.
udp‐port (Optional)SpecifiestheUDPportnumberusedbytheNetFlow
collector.Defaultis2055.