Enterasys Matrix DFE-Gold Series

show cos port-type Configuring Policy Class of Service (CoS)
Enterasys Matrix DFE-Gold Series Configuration Guide 8-25
Gbps
1 DFE-P 4Q 32/4 perc ge.2.1-30; ge.2.1-30;
Kbps ge.3.1-30; ge.3.1-30;
Mbps ge.4.1-30; ge.4.1-30;
Gbps fe.6.1-48; fe.6.1-48;
ge.6.1-6; ge.6.1-6;
fe.7.1-72 fe.7.1-72
Port type Number of Supported Eligible Unselected
Index description limiters rate type ports ports
----- ------------ --------- --------- ----------------- --------------
0 DFE-P 32 IRL 32 irl perc ge.1.1-12 ge.1.1-12
Kbps
Mbps
Gbps
1 DFE-P 8 IRL 8 irl perc ge.2.1-30; ge.2.1-30;
Kbps ge.3.1-30; ge.3.1-30;
Mbps ge.4.1-30; ge.4.1-30;
Gbps fe.6.1-48; fe.6.1-48;
ge.6.1-6; ge.6.1-6;
fe.7.1-72 fe.7.1-72
Table 8‐5providesanexplana tion ofthecommandoutput.
Numb
Table 8-5 show cos port-type Output Details
Output... What it displays...
Index Port type index. Port type 0 designates 7GR4270-12, 7G4270-12,
7G4270-09, and 7G4270-10 DFE modules only, and port type 1
designates all other modules.
Port type description Resource-specific text description of the port type. Default names are:
• DFE-P 16Q for port type 0 TXQ (Applies to 7GR4270-12, 7G4270-
12, 7G4270-09, and 7G4270-10 DFE modules only). Port type 1
designates all other modules.
• DFE-P or DFE-G 4Q for port type 1 TXQ
• DFE-P 32 IRL for port type 0 IRL (Applies to 7GR4270-12, 7G4270-
12, 7G4270-09, and 7G4270-10 DFE modules only).
• DFE-P or DFE-G 8 IRL for port type 1 IRL
Number of slices / Number of
queues
The total number of slices of transmit resources that can be divided
among port queues, and the total number of queues available. Default
port type 0 (7GR4270-12, 7G4270-12, 7G4270-09, and 7G4270-10
DFE modules only). allows 64 slices for 16 queues. Default port type 1
(all other modules) allows 32 slices for 4 queues.
Number of limiters Maximum number of inbound rate limiters configurable for each port
type. When configured for IRL, default port type 0 (7GR4270-12,
7G4270-12, 7G4270-09, and 7G4270-10 DFE modules only). allows
for 32, and default port type 1 (all other modules) allows for 8.