Enterasys Matrix DFE-Gold Series

Setting Console Port Properties show console
4-4 Port Configuration
show console
Usethiscommandtodisplaypropertiessetforoneormoreconsoleports.
Syntax
show console [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,propertiesforallconsoleportswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaypropertiesforconsoleportcom.1.1:
Matrix(rw)->show console com.1.1
Port Baud Flow Bits StopBits Parity Autobaud
------------ ------ ------ ---- ---------- ------ --------
com.1.1 38400 ctsrts 8 one none disable
clear console
Usethiscommandtoclearthepropertiessetforoneormoreconsoleports.
Syntax
clear console [port-string]
show console bits 4-8
set console bits 4-8
clear console bits 4-9
show console stopbits 4-9
set console stopbits 4-10
clear console stopbits 4-10
show console parity 4-11
set console parity 4-11
clear console parity 4-12
For information about... Refer to page...
port‐string (Optional)Displayspropertiesforspecificconsoleport(s)