Enterasys Matrix DFE-Gold Series

clear spantree spanguard Configuring Spanning Tree Bridge Parameters
Enterasys Matrix DFE-Gold Series Configuration Guide 6-37
Example
Thisexampleshowshowtoenablethespanguardfuncti on:
Matrix(rw)->set spantree spanguard enable
clear spantree spanguard
UsethiscommandtoresetsthestatusoftheSpanningTreespanguardfunctiontodisabled.
Syntax
clear spantree spanguard
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoresetthestatusofthespanguardfunctiontodisabled:
Matrix(rw)->clear spantree spanguard
show spantree spanguardtimeout
UsethiscommandtodisplaytheSpanningTreespanguardtimeoutsetting.
Syntax
show spantree spanguardtimeout
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaythespanguardtimeoutsetting:
Matrix(rw)->show spantree spanguardtimeout
spanguard timeout is set at 300 seconds.